Carbon RD46 Wheels
Main informations
Weight (gr)
Depth (mm)
Inner width (mm)
Price (€)
Tech informations
- Rims : ERASE rims (made from Toray T700 carbon fibers)
- Hubs : ERASE hubs
- Spokes : Sapim Cx-Ray (made from stainless steel)
- Nipples : Sapim Polyax (made from aluminium)
The front hubs are in 100x12.
The rear hubs are in 142x12.
Wheels pair : 1445gr.
The wheels are handbuildt with 24 Sapim Cx-Ray spokes, front and rear, two times crossed.
The wheels are built by hands and we take as much time as needed.
We tighten the spokes to an average 900N front and 1200N rear +- 5% tension on each spoke.
We true the wheel until the lateral movement is less than 0.05mm, the radial movement is less than 0.25mm.
No matter what !
*We use PKLie truing stands and WheelFanatyk tensiometers.
The wheels are delivered with tubeless tape and valves.
You just need to put your tubeless or tubetype tires on, inflate and ride.
The hub geometry is a very important point of a hub design. It defines the spokes lenght, but more importanly the wheel lateral rigidity. Further is the flange from the hub center, higher is the lateral stifness. Therefore, the wheel will be nervous and have accurate trajectories.
- Rims : Taiwan
- Hubs : Belgium
- Spokes : Belgium
- Nipples : Belgium
Colored nipples : free.
Colored valve decals : 20€.
Black spokes tying : 60€.
110 kg.
23C - 42C.
9 bar.
Our wheels get a LIFETIME warranty.
- The warranty covers only product defaults.
- The warranty does not cover damage or failure caused by crash, misuse of the products, normal wear (bearings, tubeless accesories, decal, ...) and improper assembly or maintenance by an unauthorized dealer.
Only for the initial owner.
If you got in a crash, it can happen, we offer you a crash replacement program.
- You can get a new rim with a 30% discount.
- Handbuilding is free.
- Spokes or nipples, if damaged, and shipping fees are not covered.
Only for the initial owner.
*Carbon RD46 rim price with the 30% discount : 285€.